Manualshelf

Installation guide

ManualsBrandsSharp ManualsProjectorXV-370H
101102103104105106107108109110
KINO-6612 Mini-ITX Motherboard
Page 92
Some optional items that can be purchased separately and installed on the KINO-6612
include:
TV-OUT cable
Dual RS-232 cable
Dual USB cable
5.7.2 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to the KINO-6612 to one or two IDE devices. To
connect an IDE HDD to the KINO-6612 please follow the instructions below.
Step 1: Locate the IDE connector. The location/s of the IDE device connector/s is/are
shown in Chapter 3.
Step 2: Insert the connector. Connect the IDE cable connector to the onboard
connector. See
851H853HFigure 5-13. A key on the front of the cable connector ensures it
can only be inserted in one direction.
Figure 5-13: IDE Cable Connection