Installation guide

KINO-6612 Mini-ITX Motherboard
Page 97
5.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Audio devices
 RJ-45 Ethernet cable connectors
 PS/2 devices
 Serial port devices
 USB devices
 VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-6612 external peripheral interface connector making
sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through three phone jack connections. The red phone jack is
for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to
connect audio devices to the KINO-6612.
Step 1: Locate the audio phone jacks. The location of the audio phone jacks are
shown in Chapter 3.
Step 2: Insert audio phone jack plugs. Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See
857H859HFigure 5-18. Step 0: