Installation guide

KINO-6612 Mini-ITX Motherboard
Page 122

ASK IR
Serial Port 2 mode is ASK IR
 Onboard CIR Port [Disabled]
Use the Onboard CIR Port option to select the CIR base address.

Disabled DEFAULT
No base address is assigned to CIR

3E0
CIR base address is 3E0

2E0
CIR base address is 2E0
 Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.

Disabled DEFAULT
No base address is assigned to the Parallel Port

378
Parallel Port I/O port address is 378

278
Parallel Port I/O port address is 278

3BC
Parallel Port I/O port address is 3BC
 Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.

Normal DEFAULT
The normal parallel port mode is the standard mode
for parallel port operation.

Bi-directional
Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.

EPP
The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system