Installation guide

KINO-6612 Mini-ITX Motherboard
Page 5
 2 x IDE disk drive connectors (one 40-pin and one 44-pin)
 1 x Infrared interface (IrDA) connector
 1 x LVDS connector
 1 x PCI slot
 2 x Serial ATA II (SATA II) drive connectors
 4 x RS-232 serial port connectors
 1 x RS-232/422/485 serial port connector
 1 x TV Out connector
 1 x USB 2.0 connectors (supports two USB 2.0 devices)
The KINO-6612 has the following external peripheral interface connectors on the board
rear panel.
 2 x Audio Jacks
 2 x Ethernet connectors
 1 x Parallel port (LPT) connector
 2 x PS/2 connectors
 1 x Serial port connector
 4 x USB connectors
 1 x VGA connector
The KINO-6612 has the following on-board jumpers:
 Clear CMOS
 CF card setup
 CPU frequency select
 FSB frequency select
 LCD voltage setup
 RS-232/422/485 COM2 setup
1.2.3 Technical Specifications
KINO-6612 technical specifications are listed in 747H749HTable 1-2. See Chapter 2 for details.