Installation guide

KINO-6612 Mini-ITX Motherboard
Page 21
 Boost preamplifier for MIC input
 LINE input shared with surround output; MIC input shared with Center and
LFE output
 Built-in 50mW/20ohm amplifier for both Front-out and Surround-Out
 External Amplifier Power Down (EAPD) capability
 Power management and enhanced power saving features
 Supports Power-Off CD function
 Adjustable VREFOUT control
 Supports 48KHz S/PDIF output, complying with AC'97 Rev 2.3 specifications
 Supports 32K/44.1K/48KHz S/PDIF input
 Power support: Digital: 3.3V; Analog: 3.3V/5V
 Standard 48-pin LQFP package
 EAX™ 1.0 & 2.0 compatible
 Direct Sound 3D™ compatible
 A3D™ compatible
 I3DL2 compatible
 HRTF 3D positional audio
 10-band software equalizer SIS964 PCIe x1 Bus
2.5.3 SiS964 IDE Controllers
One 40-pin IDE connector and one 44-pin IDE connector on the KINO-6612 connect to
four IDE devices and are directly interfaced to an IDE Master and IDE Slave controller on
the SIS964 Southbridge chipset. The controllers support PIO mode 0, 1, 2, 3, 4 and hard
drives with the following specifications.
 Ultra ATA/133, with data transfer rates up to 133MB/s
 Ultra ATA/100, with data transfer rates up to 100MB/s
 Ultra ATA/66, with data transfer rates up to 66MB/s
 Ultra ATA/33, with data transfer rates up to 33MB/s
The IDE connector is shown in
755H757HFigure 2-9 below.