Installation guide

KINO-6612 Mini-ITX Motherboard
Page 32
 Supports pair swap/polarity/skew correction
 Crossover Detection & Auto-Correction
 Wake-on-LAN and remote wake-up support
 Microsoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload
support
 Supports Full Duplex flow control (IEEE 802.3x)
 Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
 Supports IEEE 802.1P Layer 2 Priority Encoding
 Supports IEEE 802.1Q VLAN tagging
 Serial EEPROM
 3.3/1.8/1.5V signaling, 5V PCI I/O tolerant
 0.15µm CMOS process
 Transmit/Receive FIFO (8K/64K) support
 Supports power down/link down power saving
 Supports PCI Message Signaled Interrupt (MSI)
2.8 Environmental and Power Specifications
2.8.1 System Monitoring
Two thermal inputs on the KINO-6612 Super I/O Enhanced Hardware Monitor monitor the
following temperatures:
 System temperature
 CPU temperature
Eight voltage inputs on the KINO-6612 Super I/O Enhanced Hardware Monitor monitor the
following voltages:
 Vcore
 +3.3Vin
 +5.0Vin
 +12.0Vin