Specifications

Using the Level and Height Adjusters
l When the projector stand is on an angle, use the adjusters on the bottom of the projector to adjust the vertical
angle.
Adjustments of up
to 5” can be made.
to 5” can be made.
Notes:
1) When adjustments are made with the adjusters, the picture may become distorted, depending on the
relative positions of the projector and the screen.
2) After adjusting, in some cases, all of the adjuster feet may not be resting on the mounting surface.
To prevent the projector from wobbling, adjust all four adjuster feet so that they firmly contact the
mounting surface.
Moving the Projector
Hold with both hands, using the hand grips located on
the sides of the projector. -
Note:
When moving the projector, always
put on the lens cap
to prevent damage to the lens.
Caution:
Do not lift or carry the projector by the lens.
Lens Cap
O-1 1