Specifications

Connecting the Projector (VIDEO IJIDEO 2)
To watch video playback with the projector connected to audio/video output equipment, such as a VCR
or Laser Disc Player, or to view on a separate monitor, make the following connections.
l Always turn off the LCD Projector while connecting to video equipment, in order to protect both the
projector and ,the equipment being connected.
Note the following when using the S-VIDEO INPUT terminal:
l The S-VIDEO INPUT terminal uses a video signal system in which the picture is separated into a co101
and a luminance signal to realize a higher-quality picture.
l The S-VIDEO INPUT terminal has priority over the VIDEO INPUT terminals. Make the audio connectiol
the VIDEO INPUT audio terminals (left/right).
Jr
7 via
n The projector is provided with a terminal cover to hide connecting cables.
)
Attaching the terminal cover
Detaching the terminal cover
While pressing the 4 marked
areas, pull out to remove.
@ Push in the other 4 marked claw.
l Lead the connecting cables out through the
upper or lower notch in the centre of the cover.
c
l When the projector is ceiling mounted, invert the terminal cover before attaching.