Specifications

Specifications
Product Type
Model
Video system
Display method
Panel size
Display method
LCD panels
Drive method
No. of pixels
Lens
Projection lamp
Contrast ratio
Video input signal
S-video input signal
Video (monitor) output signal
LCD Projector
XV-380H
PAL/SECAM/NTSC 358/NTSC 4.43
LCD panels x 3, RGB optical shutter method
3.0” (4.5(H) x 6.2(W) cm)
Translucent TN liquid crystal panels
TFT (Thin Film Transistor) Active Matrix panels
309,120 dots x 3 panels
l-l.6 zoom lens, F3.6-4.6, f=t05-168 mm
250 W Metal halide
1OO:l
RCA Connector: VIDEO, composite video, lVp-p, sync negative, 7512 terminated
RCA Connector: AUDIO, 142 mVrms, more than 47KR (stereo)
It-pin mini DIN connector
Y (luminance signal): 1 Vp-p, sync negative, 75~ terminated
C (chrominance signal): burst 0.286 Vp-p, 75Q terminated
RCA Connector: VIDEO, composite video lVp-p, sync negative, 75~ terminated
RCA Connector: AUDIO, 142 mVrms, more than 47KR (stereo)
Horizontal resolution
Audio output
Speaker system
Rated voltage
Rated frequency
Power consumption
Standby consumption
Operating temperature
Storage temperature
Cabinet
Dimensions (W x D x H)
500 TV lines (video input)
3W (monaural)
3” (8 cm) round
AC 200-240V
50/60 Hz
335w
4.3 w
5°C to 40°C
-20°C to 55°C
Plastic
500 x 447 x 201 mm projector only
500 x 520 x 201 mm incl. terminal cover
Weight
Supplied accessories
12.1 kg-projector only, 12.4 kg incl. terminal cover
Remote control unit, two AAA batteries, lens cover (installed), terminal cover, extra
air filter, inverting labels, AV cable, 21 pin RCA conversion adaptor
Replacement parts
Remote control (RRMCGl310CESA), Air filter (PFILD0030CEZZ), AV cable (QCNW-
3740CEZZ) 21 pin RCA conversion adaptor (QSOCZ0305CEZZ)
Our projector uses LCD (Liquid Crystal Display) panels. These very sophisticated panels contain 309,120 pixel (xRGB)
TFTs. (Thin Film Transistors), As with any high technology electronic equipment such as large screen TVs, video systems
and/or video cameras, there are certain acceptable tolerances that the equipment must conform to.
, Sharp’s acceptable tolerances permit a total of six (6) inactive TFTs, which may result in illuminated dots on the picture
screen.
This will not affect the picture quality or the life expectancy of the unit.
*Specifications are subject to change without notice.
(B-21
--