Specifications

Setting Up the Projector
Using the Focus and Zoom
l Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector
placement.
l See pages 7,9 and 10 for details on projector setup.
SIDE VIEW
Table setting
2
. r
Zoom
1. Turn ON the MAIN POWER.
Press the MAIN POWER switch ON.
Invert
image
0
<+I- 0 1
2. Turn on the power.
(0
Press the POWER ON/OFF button on the projector or remote
0
control to turn on the power.
I
POWER indicator
3
-.........-
-.........-
=FOCUS=
3. Press the LENS button.
l When the LENS button on the remote control or LENS
ADJUSTMENT button on the projector is pressed, the LENS
adjustment mode is indicated for about 8 seconds.
l if the LENS (ADJ) button is pressed while the mode is
indicated on the screen, the picture adjustment mode
changes as shown on the left.
l You can adjust the picture as shown on the left by pressing
the ADJUSTMENT (4) or (b) buttons while in ADJUST
mode.
l Adjust the focus until the picture on the screen is sharp.
l The focus pattern appears on the screen.
l The picture can be adjusted to the desired size within the
zoom lens range.