Operation Manual

Basic Operation
-47
Picture Setting Func-
tion
This function stores all items set in “Picture”.
Five settings can be stored separately in
“Memory 1” to “Memory 5”. Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 5). Even when the input mode or
signal is changed, you can easily select opti-
mal settings from the stored settings.
■ When Saving:
Select “Memory #” or “INPUT # Memory”
before setting on the “Picture” menu.
Select “Picture Setting” in the “Picture”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
■ When Recalling Saved Settings:
When a saved memory number is selected,
the “Picture” menu settings change accord-
ingly.
Note
• The items of “Picture Setting” can be se-
lected directly by pressing
. The items
change in the order of “Memory 1” –
“Memory 5” and then “INPUT #
Memory” each time
is pressed.
■ When Changing Saved Settings:
When changing the saved “Picture” menu
settings, select the memory number first.
PICTURE SETTING button
Description
Settings of all items in “Pic-
ture” can be stored for the re-
spective input modes. The
stored settings can be se-
lected in any input modes.
Besides “Memory 1” to
“Memory 5”, other settings
can be stored for each input
mode. “INPUT 1-5 Memory”
can be selected for each in-
put mode.
Selected item
Memory 1
to
Memory 5
INPUT 1 Memory
to
INPUT 5 Memory