Service manual

No. Adjusting point Adjusting conditions Adjusting procedure

XV-Z10000

1. Make the following settings.

Destination Adjustment process Remote control setting

North America S4 Factory setting 4

Europe S3 Factory setting 3

18 Delivery set-

tings

15 Off-timer per-

formance

1. Select OFF from the process mode LINE.

Make sure the off-timer starts with 5 minutes onscreen

and the set turns itself off in 5 minutes.

16 Thermistor

performance

checking

1. Make sure that the temperature is indicated.

1. Heat the thermistor with a

hair dryer.

17 Auto sync

performance

checking

1. In the VGA, SVG Aand XGAmodes, make sure the

Clock, Phase, H-Pos and V-Pos settings can be au-

tomatically adjusted.

1. Feed the phase check pat-

tern signal.

No. Adjusting point Adjusting conditions Adjusting procedure

19 Inspection of

HTPC720P

Check that there is no abnormality with the screen.

At INPUT 5 (DVI-1 connector)

1. Receive the color bar sig-

nal.

2. Receive the gray scale sig-

nal.

3. Receive the SMPTERP-

133 signal.