User Manual

-25
Connections and Setup
Connecting to a
Computer Using an RS-
232C Cable
When the RS-232C terminal on the projector is
connected to a computer with an RS-232C
cable (null modem, cross type, commercially
available), the computer can be used to con-
trol the projector. See page 58 for details.
1 Connect one end of the RS-232C
cable (null modem, cross type) to
the RS-232C terminal on the pro-
jector.
2 Connect the other end of the RS-
232C cable to the RS-232C termi-
nal on the computer.
Note
• The RS-232C function may not operate if your
computer terminal is not correctly set up. Re-
fer to the operation manual of the computer
for details.
• See page 57 for connection of an RS-232C
cable.
• A Macintosh adapter may be required for us-
ing the computer cable to connect to some
Macintosh computers. Contact your nearest
Sharp Authorised Projector Dealer or Service
Centre.
Info
• Do not connect the RS-232C cable to a port
other than the RS-232C terminal on the com-
puter. This may damage your computer or pro-
jector.
• Do not connect or disconnect an RS-232C
cable to or from the computer while it is on.
This may damage your computer.
Controlling the Projector Using a Computer
RS-232C cable
(commercially available)
To RS-232C terminal
To RS-232C terminal
Computer