User Manual

-48
Background (Selecting a
Startup and Background Image)
Select “Background” on the “Options” menu
and the image displayed upon the
projector’s startup and when no signal is
being sent to the projector.
Setting the menu screen Page 38
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Video System (Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected au-
dio-visual equipment may not be received, de-
pending on the video signal difference. In that
case, switch the video signal.
Select “Video System” on the “Options” menu
and the appropriate video system.
Setting the menu screen Page 38
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Using the “Options” Menu
Description of Video Systems
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
• When the system mode is set to “Auto”, you
may not receive a clear picture due to signal
differences. Should this occur, switch to the
video system of the source signal.
Description of Background Images
Note
• If the input signal has interference, the screen
will be displayed during interference.
Description
When connected to PAL video
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
Selectable settings
Blue
None
Description
Blue screen
Black screen
Selectable settings
PAL
SECAM
NTSC4.43
NTSC3.58