XV-Z21000 Operation-Manual GB
Table Of Contents
- Contents
- Accessories
- IMPORTANT SAFEGUARDS
- Part Names and Functions
- Using the Remote Control
- Quick Start
- Setting Up the Projector
- Samples of Cables for Connection
- Connecting to Video Equipment
- Connecting to a Computer
- Controlling the Projector by a Computer
- Turning the Projector On/Off
- Image Projection
- Operating with the Remote Control
- Selecting the Screen Size
- Menu Bar Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Selecting the Picture Mode
- Adjusting the Image
- Selecting the Gamma Position
- Switching the Iris Setting
- Lamp Setting
- Using the Advanced
- Adjusting the Colors
- Adjusting the BrilliantColor TM
- Selecting the Progressive Mode
- Selecting the Film Mode
- Reducing Image Noise (DNR)
- Mosquito Noise Reduction (MNR)
- Adjusting the Unveil Control
- Adjusting the Automatic Contrast
- Resetting All Adjustment Items
- Gamma Adjustment (“Gamma” Menu)
- Computer Image Adjustment (“Fine Sync” Menu)
- Using the “Options” Menu
- Adjusting the Image Position
- Adjusting the Vertical Size of the Display (Subtitle Setting)
- Adjusting the Overscan
- Adjusting the White Level/Black Level
- Turning LED Off
- Checking the Lamp Life Status
- Setting On-screen Display
- Setting the Video System
- Signal Type Setting
- Adjusting the Color Space
- Adjusting the Dynamic Range
- Selecting the Background Image
- Adjusting the Economy Mode
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- Reversing/Inverting Projected Images
- Returning to the Default Settings
- Other Function
- Maintenance Indicators/Maintenance
- Regarding the Lamp
- Connecting Pin Assignments
- RS-232C Specifi cations and Command Settings
- Wired Remote Control Terminal Specifications
- Computer Compatibility Chart
- Troubleshooting
- Specifications
- Dimensions
- Index
Basic Operation
-29
Operating with the Remote Control
Switching the Iris Setting
This function controls the quantity of the
projected light and the contrast of the image.
Press
IRIS.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
Note
• For details, see page 37.
Adjusting the Contrast
1 Press CONTRAST.
2 Press \ or | to adjust the con-
trast.
3 Press ENTER.
Note
• For details, see page 36.
Adjusting the Quantity of Light
1 Press BRIGHT.
2 Press \ or | to adjust the quan-
tity of light.
3 Press ENTER.
Note
• For details, see page 36.
Freezing a Moving Image
1 Press FREEZE.
• The projected image is frozen.
2 Press FREEZE again to return
to the moving image from the cur-
rently connected device.
Selecting the Picture Mode
You can select the appropriate picture mode to best
match the projected image you are watching.
Press
PICTURE MODE.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
Note
• For details, see page 36.
FREEZE
ENTER
PICTURE MODE
CONTRAST
BRIGHT
IRIS
Adjustment buttons
(
"/'/\/|)
MEDIUM MODEHIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
STANDARD NATURAL DYNAMIC
MEMORY MOVIE2 MOVIE1
XVZ21000EOusyuP25-31.indd29XVZ21000EOusyuP25-31.indd29 2006/07/3119:54:412006/07/3119:54:41