User Manual

EN
EN – 14EN – 14
BEFORE USING THE OVEN
When the oven  rst plugged in, beep will sound and the display will show "1: 00". Note that the clock does not have
to be set for the oven to operate correctly. To set the clock, follow the instructions in the “Setting the Clock” section of
this User Manual.
When new, the very  rst time the grill is used, smoke and odors will be given o . To avoid this happening when food is
being cooked, use the grill function without food for approx. 20 minutes.
• After opening and closing the door, the oven will enter the standby mode. If no buttons are press within 1 minute,
the display will remain on and the buttons will not operate. To enter standby mode again, open and close the door.
• During cooking, if the STOP/ECO button is pressed once, the cooking cycle will be paused. To restart cooking press
the START/QUICK START button. If the STOP/ECO button is pressed twice, cooking will be canceled.
• When programming the oven for a particular function and there is a pause between button presses of more than 30
seconds the oven will return to the standby mode.
• When a cooking cycle is completed, the display will show “End” and a tone will be heard every two minutes until a
button is pressed or the door is opened.
SETTING THE CLOCK
This oven has a clock which can be used in either 12- or 24-hour mode. To set the clock, follow the instructions as
below:
1. In standby mode, press and hold TIME/SET CLOCK button for at least 3 seconds to enter the clock setting mode.
2. Press the TIME/SET CLOCK button to select the 12- or 24-hour clock mode.
3. Rotate the JOG DIAL to set the hour. Press the TIME/SET CLOCK button to store.
4. Rotate the JOG DIAL to set the minutes. Press the TIME/SET CLOCK button to store and exit the clock setting
mode.
• It is not necessary to set the clock for the oven to work normally.
• While in the cook mode, press the TIME/SET CLOCK button to see the time of day (if set). The time of day will
change back to the cooking count down after  ve seconds. Note that the time of day can not be viewed if the
kitchen timer has been set.
EN – 15
EN – 15
MICROWAVE COOKING
To use the microwave function, follow the insturcitons given below:
1. In standby mode, press the MICROWAVE POWER button to select power level. Each time this button is pressed,
the display will show the microwave power level.
2. Once the desired microwave power level has been selected, rotate the JOG DIAL to select the time to cook.
3. Press the START/QUICK START button to start cooking.
4. When the cooking cycle is completed, the display will show “End” and a tone will be heard every two minutes until
a button is pressed or the door is opened.
Note that the table below is for guidance. Your oven has 10 microwave power levels. These are 10%, 20%, 30%, 40%,
50%, 60%, 70%, 80%, 90% and 100%. The actual wattage output can be calculated by multiplying the microwave
power by the percentage.
Microwave Cooking Guide:
Display
Microwave
Power
Suggested Use
P100 100%
Use this setting for fast cooking or reheating e.g., for casseroles, hot beverages,
vegetables etc.
P-80 80%
For dense foods which require a long cooking time when cooked conventionally,
e.g., beef dishes. It is advisable to use this power setting to ensure the meat will be
tender.
P-60 60%
Used for longer cooking of dense foods such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as cheese sauce and sponge cakes.
P-40 40%
Defrost setting; select this power setting, to ensure that the dish defrosts evenly.
This setting is also ideal for simmering rice, pasta, dumplings and cooking egg
custard.
P-20 20% For gentle defrosting, e.g., cream gateaux or pastry.
• During cooking you can check the cooking power level by pressing and holing the MICROWAVE POWER button.
• The longest cooking time is 95 minutes.