User manual

Internet Settings 127
For dial-up connection
1.
When you have completed your settings, insert the modem card into the CF
card slot.
Be sure to insert the card with the unit turned on, and remove it using the Eject
Operation. (See the separate Start-up Guide.)
2.
Tap the Connection Status icon ( ) on the taskbar.
The pop-up list for network connection appears.
3.
Tap the drop-down list button to select the desired dial-up account if multiple
dial-up accounts are available.
4.
Tap “Connect” to start connection.
(While the connection is established, “Connect” turns to “Disconnect”.)
5.
Tap “Disconnect” to disconnect the line.
Network & Sync
The Network & Sync application allows you to set up dial-up and LAN preferences,
and IP address for USB or serial connection. The dial-up and LAN settings are
effective for both the Network & Sync and Internet Wizard applications.
• Dial-up - PPP: for dial-up connection using a modem card (CF type) and
ordinary telephone line
• IrDA - PPP: for dial-up connection using the IrDA port
• LAN - TCP/IP: for local area network connection using the LAN card (CF type)
• USB - TCP/IP: for local area network connection using the USB network
00.Cover.book Page 127 Monday, January 21, 2002 5:47 PM