User Manual
104 Other Applications
• When you complete the settings, tap “OK” on the Settings screen. The screen
returns to the Main menu screen.
• The settings you made will not be stored unless you tap “OK” on the Settings
screen.
Setting the Start-up screen/Opening screen/Auto-off
function/Backlight function
Highlight “Start-up/Auto-off” by pressing and press .
The Start-up/Auto-off screen appears.
Selecting the Start-up screen:
You can select the start-up screen when the unit is turned on.
1.
Highlight “Start-up” by pressing and press .
2.
Select the desired start-up screen by pressing and press .
Setting the Opening screen:
You can select whether the opening screen is displayed or not when the unit is
turned on.
1.
Highlight “Opening” by pressing .
2.
Select the “On” or “Off” radio button by pressing and press .
Adjusting the Auto-off function:
To conserve the battery power, the unit will turn itself off if it has not been used for
a set number of minutes.
1.
Highlight “Auto-off” by pressing and press .
2.
Select the desired auto-off time by pressing and press .
Note:
In order to avoid accidentally interrupting data transfers, the Auto-off
function is automatically disabled while communicating with your PC.
Adjusting the Backlight function
1.
Highlight “Backlight” by pressing and press .
2.
Select the desired backlight time by pressing and press .
After setting the above, highlight “OK” by pressing and press (or tap
“OK”). The screen returns to the Settings screen. Tap “OK” to store the settings.
e00_zq800(introduction)60.book Page 104 Wednesday, April 24, 2002 8:45 PM