Instruction Manual

USING YOUR CADDY
2.
1.
5. 6. 7.
3. 4.
Lift your mattress and slide top flap of caddy underneath.
Attach hook-and-loop fasteners to the back of the caddy to
ensure secure placement.
Sticks to bed
Slide the shelf into either of the 2 pockets. Make sure the lip
of the shelf is inserted into the caddy.
Connect the provided cable to the charge pad then connect
the other end of the cable to a powered USB port.
Place the charge pad on the shelf. Make sure the shelf does not
tilt otherwise your device may fall off.
Remove any phone accessories. A non-metal phone case up
to 3 mm thick can be used.
Place your device on top of the pad matching the center of your
device to the center of the charge pad.
1
2
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attaches to back
hook-and-loop
fastener.