Operating Instructions

ManualsBrandsSharper Image ManualsElectronicsAuto Keyfinder Magnetic

SMART TRACK KEY

FINDER + STORAGE

SMART TRACK KEY FINDER + STORAGE

GETTING STARTED

The Smart Track Key Finder + Storage makes it easy

to keep everything together. The magnetic fobs

attach to the tray lid whether it’s on the catchall tray

in your drop spot or mounted to the wall. And if you

still forget to put your keys in their spot, simply pick

up the lid – it doubles as a wireless remote with a

range of 45 feet, triggering distinctive alarms from

each fob. It’s never been easier to find your keys.

Warning: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

CONGRATULATIONS ON

YOUR PURCHASE OF THE

SMART TRACK KEY FINDER

+ STORAGE

Please read all instructions and warnings prior

to use. Keep this sheet as it contains important

information for future reference.

FCC STATEMENT

SHARPER IMAGE

NAME AND LOGOS (INCLUDING

THE 77 LOGO) ARE TRADEMARKS OR REGISTERED

MERCHSOURCE, LLC. IRVINE, CA 92618.

FOR TECHNICAL SUPPORT, PLEASE CALL

1-800-374-2744

The artwork and design of this manual are protected

by US copyright law and may not be reproduced,

distributed, displayed, published or used for any

purpose without prior written permission. It is not

permitted to alter, remove or reproduce any

trademarks or copyright notice from this manual.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Printed in China

Model Number:1012709

MOUNTING THE REMOTE

•

There are 2 Options

1. Stick the mount on the wall with the

included sticky pad.

2. Lock the mount on the wall with the

included screws.

•

Slide down the remote into the lock position.

SAFETY INFORMATION AND WARNINGS

All of the safety and operating instructions should be read, understood and followed before

the unit is operated.

SAFETY WARNINGS- PLEASE READ CAREFULLY

• This is not a children’s product.

• Small parts, especially the button cell batteries, pose a choking hazard to young children.

• If the product appears cracked or broken in any manner, discontinue use and discard immediately.

BATTERY WARNING:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

• Alkaline batteries are recommended. Use only the specified voltage.

• Insert batteries using the correct polarity. Always use, replace, and recharge (if applicable) batteries

under adult supervision.

• Do not attempt to charge non-rechargeable batteries.

• Do not short-circuit the battery supply terminals.

• Do not dispose of batteries in fire: batteries may explode or leak.

• Remove batteries before storing.

• Recycle or dispose of batteries according to federal, state, and local laws.

• Keep these instructions for future reference.

KEEP THIS PACKAGING FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.

Do not ingest the battery. Chemical burn hazard.

(The remote control supplied with) This product contains a coin/button cell battery. If the coin/button

cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from

children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

WARNING

Summary of content (2 pages)

PAGE 1
Model Number: 1012709 Printed in China FOR TECHNICAL SUPPORT, PLEASE CALL 1-800-374-2744 SHARPER IMAGE ® NAME AND LOGOS (INCLUDING THE 77 LOGO) ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND © 2020 MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission.
PAGE 2
PARTS OPERATION • 2 Key fobs • 1 Wireless remote • 1 Tray • 3 Button cell batteries • 1 Wall mount • 1 Sticky pad • 2 Key rings • 2 Wall screws • 1 Pin tool 1. Attach the fob to the key ring and attach your keys to the key ring. 2. Press the corresponding button on the wireless remote in order to locate the desired fob. 3. If the fob is in range (55 feet in an open area), it will emit an audible beep for a few seconds when you press the corresponding remote button. 4.