Operating Instructions

INSTALLING BATTERIES
FOBS
INSTALLING BATTERIES
WIRELESS REMOTE
• 2 Key fobs
• 1 Wireless remote
• 1 Tray
• 3 Button cell batteries
• 1 Wall mount
• 1 Sticky pad
• 2 Key rings
• 2 Wall screws
• 1 Pin tool
OPERATION
1. Attach the fob to the key ring and attach your
keys to the key ring.
2. Press the corresponding button on the wireless
remote in order to locate the desired fob.
3. If the fob is in range (55 feet in an open area), it
will emit an audible beep for a few seconds
when you press the corresponding remote
button.
4. If no beep is heard, wait 4 seconds and press
the corresponding button again. You may have
to change your location if the beep is still not
heard. Continue pressing the button every 4
seconds while moving to different areas.
NOTE: The wireless remote is portable, it can be
removed from the provided Tabletop Cradle and
carried with you to locate devices attached to a fob.
Requires 1 CR2032
1. Using a coin, turn the battery cover
counterclockwise to open it.
2. Insert the CR2023 battery cells according to
the diagram instruction found on the inside
portion of the tray.
3. Replace the battery cover and use a coin to
secure it in place by turning it clockwise.
PA RTS
Each requires 1 CR2032 button cell battery
(included).
1. Insert a pin into the hole on the fobs and push
upwards to open the cover. See Figure A.
2. Insert a new battery into the metal slot,
ensuring the “+” side of the battery is facing up.
The FOB will make its characteristic beeping
sound as it is inserted into the slot.
3. Align the arrow insided the cover to the hole
position and press down to lock in the cover.
See Figure B.
Wireless remoteKey fobs
Wall mount Sticky pad
Pin tool
Tray
Key rings
Button cell batteries
Wall screws
Closing direction
Figure B
Figure A