Oxygenics® Resort Spa® Self-Pressurizing Showerhead EL001 Instructions Read and save these instructions.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Our goal is that you will be completely satisfied with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. Since 1977, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable.
Installation Instructions 1. R emove the old showerhead. Cover the shower arm with a piece of cloth and hold vice-grip pliers securely to the shower arm, approximately one inch above the showerhead attachment nut. Using a crescent wrench, securely grip the showerhead attachment nut. Turn the crescent wrench slowly in a counterclockwise direction, maintaining a firm grip. Remove the showerhead from the shower arm. See Figure 1. Figure 1 2.
Installation Instructions 4. W rap Teflon® tape 11/2 to 3 turns clockwise around the threaded tip of the shower arm. See Figure 4. 5. S crew the new showerhead clockwise onto the taped portion of the shower arm. Place cloth inside the crescent wrench grip area and tighten slightly but securely for a snug fit. See Figure 5.
Operation To adjust and fine-tune showerhead water pressure, rotate the comfort-control lever between its vertical “LOW” position and horizontal “FULL FLOW” position. Ideal water pressure is between 40-80 psi, but will flow in a range from 20 to 120 psi. Note: The comfort control lever is NOT a shutoff valve. When turned to the lowest position, the showerhead continues to flow at 1/2 to 11/2 GPM. This is a normal safety feature.
Warranty What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.
