AIRBAR™ TOWER FAN OWNER’S GUIDE MODELS AXIS 32 / AXIS 42
CONTENTS Important Safety Instructions......................................................................................................................................4 Product Information..........................................................................................................................................................11 Assembly..........................................................................................................................................................
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See sihomecomfort.
INSTALLATION WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - Place this product away from curtains, draperies, tablecloths and other fabrics, since they may be drawn into the product, damage the motor and/or cause a fire. - No part of this product (the appliance, power cord, plug, packaging, etc.) should be placed near furnaces, fireplaces, stoves or other high temperature heat sources.
SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - WARNING: To reduce likelihood of circuit overload, fire and electric shock, do not operate with a solid state speed device, such as a dimmer control switch. - Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. - Do not operate unit if the unit has been dropped or damaged.
- Before moving, repositioning, servicing, cleaning and when not in use, use the product controls to turn off the power and then unplug. To disconnect from outlet, grasp and pull only the plug. Also, power off and unplug if the product will be left unattended for an extended period of time or during electrical storms. SERVICING WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - Clean your product regularly, only as is instructed in this manual.
User Servicing Instructions 1. Using the product controls, turn off the appliance. 2. Grasp the plug (not the cord) and disconnect from the outlet. 3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as approved by Consumer Service. For an authorized replacement fuse, please contact Consumer Service. 4. Once the replacement is received, use a small flat-head screwdriver to slide open the fuse cover (located on the plug) (See Fig. A). 5.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Supplier’s FCC Declaration of Conformity Unique Identifier: Sharper Image Models AXIS 32, AXIS 42 Responsible Party: Vornado Air LLC Mailing Address : 415 E. 13th St., Andover, KS 67002 Contact: www.sihomecomfort.com WARNING: Batteries may pose a choking hazard. Do not let children handle batteries. BATTERY DISPOSAL: Please dispose of batteries according to the local laws and regulations of your region, and while keeping them away from children.
PRODUCT INFORMATION Your product includes the following: 1 2 3 4 5 Fan Body Top Half Magnetic Base Parts (2) Bottom Half Magnetic Base Parts (2) Remote AAA Batteries (2) (Not Shown) 1 2 3 2 3 WARNING - Choking hazard. Keep small parts, like screws, away from children and pets.
2 2 4 1 3 12 English 3
ASSEMBLY No tools required. The AXIS 32/42 can be used in one of two orientations: horizontal or vertical. For HORIZONTAL orientation: 1. Lay the fan body horizontally. 2. Install the 2 bottom half magnetic base parts, one on each end of the fan body. Take care to align the notch on each bottom base part with the notch on the fan body. 3. Install the 2 top half magnetic base parts. Again, take care to align the notches on the base parts with the notches on the fan body.
For VERTICAL orientation: 1. Lay the fan body horizontally. 2. Locate the power cord. This will be the bottom of the product in the vertical orientation. 3. Install the 2 bottom half magnetic base parts to the bottom of the fan head (the end with the power cord). Take care to align the notch on each bottom base parts with the notches on the fan body. 4. Install the 2 top half magnetic base parts on the other end of the fan head.
HOW TO USE POWER ON / OFF 1. Touch ( ) to power unit on and off. 2. There are three speeds: HIGH, MEDIUM, LOW. 3. Touch ( ) to lower speed. Touch ( ) to increase speed.
REMOTE CONTROL This product comes with a remote control. The remote control functions are the same as the control panel on the product. The remote control requires 2 AAA batteries (included but not installed). To install the batteries, remove the cover located on the underside of the remote control. If necessary, clean the battery contacts and also those of the device prior to battery installation. Remove any plastic protection from the batteries.
CLEANING & STORAGE Your fan will need regular cleaning. The fan has no user serviceable parts inside and cannot be opened for cleaning. Never clean the product in any manner other than instructed in this owner's guide. 1. Power off and unplug the unit prior to cleaning. 2. Dust or wipe the fan with a damp cloth. 3. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust. During the off-season or after extended periods of non-use, you may choose to store your fan.
TROUBLESHOOTING PROBLEM The unit fails to power on. POSSIBLE CAUSE AND SOLUTION Unit is not plugged in. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. Fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for how to replace the fuse or contact Consumer Service. Unit is not producing sufficient amount of air. Ensure unit is set to highest setting for maximum air circulation.
2 YEAR WARRANTY If you’re not satisfied with this product, let us know. SATISFACTION GUARANTEE Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image® Fan (“Product”) is free from defects in material or workmanship for a period of two (2) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
an external device that alters or converts the voltage or frequency of electricity, or shipping a Vornado product to a country not intended for use will void all warranties. Any unauthorized product modification, repair by unauthorized repair center, or use of non-approved replacement parts is not recommended and any consequences will not be covered by support services or product warranties. The product warranty will be honored only on models that are being used in the country intended.
833.800.8669 | sihomecomfort.com | help@sihomecomfort.
