TM Instruction Booklet Model: 2DISH connect www.myproducts.
Introduction Congratulations! You are now the proud owner of a myhotmat connect. Please read these instructions carefully before using your device for the first time. The myhotmat connect is designed to be your hosting and dining companion. Its features are especially designed to make your hosting experience fun and easy. myhotmat connect keeps your cooked food at just the right temperature for serving. It allows you easy access to the food close to the dining table, simplifying the logistics of serving.
When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. DO NOT touch hot surfaces. 3. To protect against electrical hazards, DO NOT immerse cord, plugs, or the appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before folding and before cleaning the appliance. 6.
BEFORE FIRST USE . Wipe the aluminum and silicon surfaces of the Warming Tray with a damp cloth; dry thoroughly. HOW TO USE Unfold the myhotmat™. Always make sure your myhotmat is placed on a surface material that can withstand heat of 130 degrees Fahrenheit (55 degrees Celsius). Connect the power cord to the 3-pin insert in the Warming Tray and then plug into an A.C. outlet. Ensure that the voltage indicated on the rating plate of the appliance agrees with the mains voltage in your area.
3 pin insert Warm Off Hot Light indicator IMPORTANT: Porcelain and china dishes may cause scratches. Place dishes carefully on the aluminum Teflon-coated heating surface to prevent scratching. HELPFUL HINTS • Ensure that the Warming Tray is always placed on a flat and sturdy surface. • Covered crockery dishes with a flat base and edges that are not too high keep food warmest. CLEANING Always unplug the appliance and let it cool before cleaning.
Your myhotmat connect can connect up to 5 identical units using only one socket connection. To connect an additional unit, use the dedicated connecting cable and attach it first to the 3-pin insert of the additional unit to be added. Then connect it to the opposite insert of the original unit. To connect more units (up to 5 units only) , repeat this process and connect each additional unit it to the preceding unit. After all units are connected, adjust each unit to your temperature of choice.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
