Bedside CD/AM/FM Stereo & Dual Alarm Clocks with Remote Control and Powered Subwoofer GT800 Instructions Read and save these instructions.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable.
Warnings Please read this instruction manual and familiarize yourself with the unit before using it for the first time. Please retain this manual for future reference. Caution The exclamation point within the triangle is a warning sign alerting the user to important instructions accompanying the product. The lightning bolt within the triangle is a warning sign alerting the user to “dangerous voltage’’ inside the unit. To reduce the risk of electric shock, do not remove the cover.
Battery Precautions •Do not mix different types of batteries together (e.g. alkaline and carbon-zinc) or old batteries with fresh ones. •If the device will not be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. •Nonrechargeable batteries should not be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.) •Read all instructions carefully before use. Quick Start Stereo Setup 1.
Quick Start Stereo Setup 2. Plug the SYSTEM CONTROL cord (D) from the main unit into the SYSTEM CONTROL cord (E) from the satellite unit. 3. Plug one end of the audio cable (C) into the AUDIO jack on the back cabinet of the main unit and the other end into the AUDIO jack on the satellite unit. 4. Plug the FM wire antenna (A) into the FM ANT jack on the back cabinet of the main unit. For best results, fully extend the wire antenna and hang the circular end from a nail in the wall. 5.
Quick Start Clock Setting 1. To open the CD lid and access the control buttons, press the OPEN button on the top of the main unit. The CD lid automatically powers open. 2. To enter the clock setting mode, press the CLOCK SET button. The hour flashes. 3. To set the hour, press the TUNE UP or TUNE DOWN button to increase or decrease the hour. 4. To confirm the hour setting, press the CLOCK SET button. The minutes flash. 5.
Quick Start CD Playback 8. To pause playback, press the PLAY/PAUSE/STOP" #/ $ button. To resume play#/ $ button again. back, press the PLAY/PAUSE/STOP" 9. To stop playback, press and hold the PLAY/PAUSE/STOP" #/ $ button for two seconds. Tuner 1. To select the tuner function, press the POWER/FUNCTION button on the main unit until a radio frequency appears on the LCD. 2. To select the desired band, press the AM/FM button. The FM band appears in MHz and the AM band appears in kHz. 3.
Instructions Diagram of Parts Main Unit Tune/Clock Up/Dn Play/ Pause/ Stop #/ $ " AM/FM Skip/ Memory +/- AM/FM Display Memory Up/Dn Volume Up/Dn VOLUME SKIP/MEMORY UP Function POWER/FUNCTION TUNE. DN CLOCK DN Snooze Volume Open +/- Satellite Unit Snooze Alarm Set 1/2 TUNE.
Stereo Setup Cables A B C D Display Day of the Week Alarm 2 On Buzzer Alarm Indicator CD Icon CD Repeat Icon Alarm 1 On CD/Radio Alarm Indicator AM/PM Indicator Clock Equalizer Mode E
Stereo Setup Remote E TO P S P LA Y S D/M-UP FW V/M-DN RE MUTE U PA /DIS PL REPEAT AY MEMORY TUNE TUNE UP DN VOLUME EQ FUNCTION POWER Stereo Setup 1. Unpack the stereo and all included cords. Note: First determine where the units will be located, then connect all cables. 2. Plug the SYSTEM CONTROL cord (D) from the main unit into the SYSTEM CONTROL cord (E) from the satellite unit. 3.
Clock Setting Important: Remove the protective sheet of paper from the CD tray in the main unit. To open the CD lid, press the OPEN button Battery Installation Remove the battery compartment cover from the back of the remote and insert 2 AAA batteries, observing proper +/- polarities as indicated inside the compartment. Replace cover. Power and Function Selection 1. To turn the unit on, press the POWER button on the main unit or remote. The unit turns on in the function last used. 2.
Clock Setting 9. To close the CD lid, press the CLOSE button. Note: Do not push or forcibly close the CD lid on the main unit by hand. Press the CLOSE button. Alarm Functions This unit allows you to individually program two different alarms, Alarm 1 and Alarm 2, to sound at different times. You may choose to wake to the CD track of your choice, the radio or a buzzer for each alarm.
Alarm Functions 10.To confirm the alarm type, press the CLOCK SET button. If “Buzzer” or “Radio” is selected, “VOL” flashes. (Skip to Step 13.) If “CD” is selected, “TRACK” flashes. 11.To select the CD track you wish to wake to, press the TUNE UP or TUNE DOWN button. 12.To confirm the track number, press the CLOCK SET button. “VOL” flashes. 13.To select the volume level of the alarm, press the TUNE UP or TUNE DOWN button to increase or decrease the volume level. 14.
CD Functions Note: If the CD lid is left open for more than one minute, it automatically powers closed. 4. To turn the unit on in the CD mode, press the POWER/FUNCTION button until a appears on the LCD. 5. To start playback at the beginning of the CD, press the PLAY/PAUSE/STOP #/ $ button on the main unit. " 6. To select a specific track during playback, press SKIP + or - until the desired #/ $ button track number appears. In stop mode, press the PLAY/PAUSE/STOP" after you select a track. 7.
Station Memory Presets 8. To begin programmed playback, press the MEMORY button and then the PLAY/PAUSE button. “MEMORY” appears in the display and playback will begin on the first track that you programmed. The player continues to play all of the tracks you have programmed in the order in which they were programmed. Once the last programmed track has played, the player will stop and the display will show the disc information. 9.
Station Memory Presets 4. To confirm the preset number position, press the MEMORY button on the remote. 5. To enter up to 40 AM or FM stations into the preset memory, repeat steps 1 through 4 above. 6. To tune in a preset station, ensure that the unit is in tuner mode, and press the MEMORY UP or MEMORY DOWN button on the remote or the main unit until the desired preset number appears.
Backlight Functions Single Color Mode: To lock the color display on one color, press and hold the COLOR MODE button on the back cabinet of the desired unit until the display turns white, then release. To select the desired display color, either press and release the COLOR MODE button until the desired color appears or wait for the unit to automatically rotate in 2-second intervals through all the colors, then press the COLOR MODE button again when the desired color appears.
Statement of FCC/DHHS Compliance WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This product complies with DHHS Rule 21 subchapter J at date of manufacture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WARRANTY This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts. What The Sharper Image Will Do The Sharper Image will repair any defects in materials or workmanship.
