Full Product Manual

16 English
POSSIBLE CAUSE AND SOLUTIONPROBLEM
TROUBLESHOOTING
The unit fails to
power on.
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker/ground fault circuit interrupter has
tripped or blown fuse. Reset circuit breaker/ground fault circuit
interrupter, or replace fuse. For assistance, contact licensed
electrician.
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
Water tank has been overfilled. Do not fill water above MAX fill
line on water view window. Remove water from water tank and
refill at or below MAX fill line
Unit is not
producing
desired amount
of humidity or
mist output has
ceased.
Water level in water tank is low and the LED indicator light is
flashing red. Refill with clean, cool tap water. See HOW TO USE.
Water tank is empty and auto shutoff has occurred. Refill with
clean, cool tap water. See HOW TO USE.
The ultrasonic disk is dirty and needs cleaned. See CLEANING.
Airflow is blocked. Remove obstruction.
White dust has
accumulated on
Mist Outlet or on
flooring below.
Unit and ultrasonic disk is in need of cleaning. See CLEANING.
Water is too hard. Use distilled water.