User's Manual

Getting Started

Listening to your iPhone/iPod:

1. Press the power button on the top of unit to turn ON.

2. Fit iPod/iPhone carefully into dock, docking connector should easily match

with socket on your iPod/iPhone.

Note: Do not force. Carefully slide iPod/iPhone over dock connector to

avoid damage.

WARNING: DOCKING CONNECTOR IS DESIGNED FOR APPLE iPOD/

iPHONE MUSIC PLAYERS ONLY. ATTEMPTING TO ATTACH OR FORCE ANY

NON-iPOD/iPHONE MUSIC PLAYER INTO THE DOCKING CONNECTOR

WILL DAMAGE AND EVEN DESTROY YOUR DEVICE.

3. Press the play/pause ( ) button on your iPod/iPhone to play, press again

to pause. The iPod icon will appear on the LCD display to indicate the iPod

mode has been selected.

4. Press the or on your iPod/iPhone to go to the next or previous track.

5. Press the and on the unit to adjust the volume.

Note: Your iPod/iPhone will charge even if the POWER button is turned off.

The unit only needs to be plugged in for the iPod/iPhone to charge.

Setting the Time

1. Press the HOUR button located on the bottom of the unit, hour digits will

begin ﬂashing. Press the and buttons to select the current hour. Press

HOUR button again to exit the hour setting mode OR after 10 seconds the

display will stop ﬂashing to indicate the hour is set.

2. Press the MINUTE button located on the bottom of the unit, minute digits will

begin ﬂashing. Press the

and buttons to select the current minute. Press

MINUTE button again to exit the minute setting mode OR after 10 seconds

the display will stop ﬂashing to indicate the minute is set.

Setting the Alarm

For your convenience, two separate alarms may be set:

Alarm 1 button

1. Press the al 1 button on the bottom of the unit. The al 1 icon will appear on

the LCD display to indicate the alarm1 is activated.

2. Press and hold the al 1 button for 3 seconds, hour digits will begin ashing.

Press the and buttons to select the desired hour.

3. Press the al 1 button again, minute digits will begin ﬂashing. Press the and

buttons to select your desired minutes.

4. Press the al 1 button for the third time to exit the alarm setting mode or after 5

seconds the display will stop ﬂashing to indicate the alarm is set.

5. Press the “al mode” button on the bottom of the unit until the wake mode

icon appears on the LCD display to indicate the wake mode of your choice:

iPod or beep tone.

6. Press the al 1 button on the bottom of the unit again to deactivate the al 1.

The al 1 icon will disappear from the display.

EC-P115_Folding Travel Dock_DetaPage 1 7/7/09 10:26:45 PM