Wireless Security System SI519 Instructions Wireless Security Camera SI513 Instructions Read and save these instructions.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life easier and more enjoyable.
General Description The Wireless Security System comes with one camera transmitter and one monitor receiver. Additional cameras can be purchased (see below). Up to four cameras may be operated within a 100-foot range. Each camera broadcasts on one of four selectable frequencies. There is no limit to the number of monitors that can be operated in the area at one time. Adapters are included for basic use and battery operation is available for maximum portability.
Power Requirements The camera and monitor can be powered by batteries or by the included adapter. We recommend saving batteries by using the power adapters whenever possible. The batteries are disengaged automatically if adapters are connected. •Do not mix old and new batteries. •Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries.
Controls and Operation The monitor must be set to the same channel as the camera to receive the camera signal. If more than one camera is used, set each camera to a different channel. Select the matching channel on the monitor to switch between desired cameras. Use the monitor jacks to display the picture and sound on your own TV/monitor instead of the built-in monitor, or to record through a VCR. (A cable is included to connect the LCD monitor to the audio/video jacks on most TV or VCR systems.
Controls and Operation nterference from other electronic products (or if multiple cameras are used) may cause poor or distorted reception. Reorient the equipment and space them further apart to resolve interference problems. The camera can be wall-mounted or positioned on a flat surface. (Note: The base is removable.) If it is not convenient to access the camera for easy battery replacement, we suggest using the included AC adapter. Neither the camera nor the monitor are designed for outdoor use.
Statement of FCC/DHHS Compliance WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This product complies with DHHS Rule 21 subchapter J at date of manufacture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Statement of FCC/DHHS Compliance If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
WARRANTY What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for one year from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.
