Quadra® Silent Air Purifier SI867 Instructions INCLUDES IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS.
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate your business very much. Our goal is that you will be completely satisfied with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. Since 1977, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable.
Table of Contents Warnings....................................................................................4 Important Information - Please Read.......................................6 Frequently Asked Questions....................................................7 OzoneGuard™........................................................................8 General Instructions....................................................................9 Setup and Operation..................................................
Warnings Warning: To reduce the risk of fire, electric shock or injury when using any electrical appliance, basic precautions should always be observed, including the following: • This appliance operates at 110V AC and 50Hz or 60Hz only. • Connect to a polarized outlet only. • Plug is polarized with one blade wider than the other. The plug is only designed to fit in polarized outlet. Do not attempt to defeat this safety feature. • Use indoors only.
Warnings damaged, left outdoors or dropped into water, return it to a service center or to the original place of purchase. • Do not pull, lift or carry by the power cord. Do not use the cord as a handle, close a door on the cord, or pull the cord around or against sharp edges or corners. • Keep the cord away from heated surfaces. • A damaged power cord must be replaced by qualified service personnel only. There are no user-serviceable parts inside the unit.
Important Information – Please Read The collection grid has many edges and areas that can trap water. Ensure the grid is completely dry before re-inserting it into the unit. If it is not completely dry, the unit could be damaged. If water is used to clean the grid, allow at least 24 hours for the collection grid to dry. This unit should not be located near a fireplace, whether or not the fireplace is actually in operation.
Frequently Asked Questions How often is cleaning required? Clean the grids at least every two weeks, anytime The Sharper Image® Quadra® Silent Air Purifier makes a sound or when the Cleaning Overdue indicator illuminates. How should it be cleaned? Wipe the removable collection grid with a damp cloth, paper towel or sponge. It is very important that the collection grid be allowed to dry completely before returning it to the main housing.
OzoneGuard™ The Sharper Image Quadra was packed with an OzoneGuard front grill preinstalled. To clean the OzoneGuard and the front grill, follow the directions for Thorough Cleaning of the front grill. What does OzoneGuard™ do? With the OzoneGuard in place, a significant portion of groundlevel ozone inside the air purifier — including any trace levels of ozone by-product — is converted into oxygen before the cleaned air circulates back into the room.
General Instructions Setup and Operation Place The Sharper Image Quadra on a level surface, at least twelve inches from the wall and furniture. Plug into a polarized 110V outlet. (Read Warnings for details.) Switch the MODE CONTROL to the desired setting: 12" LOW: For small rooms or rooms where the door is usually closed. MEDIUM: For average-sized rooms. HIGH: For large rooms and higher traffic areas. Mode Control These are recommended settings. Adjust to your own comfort level.
Setup and Operation Normal operation at all power levels involves a programmed cycle of air movement. Mode Control To override the power control setting and let the unit run at maximum power for five minutes, press BOOST. Your previously selected power level resumes after the five minutes has elapsed. Note: When the unit is on, the negative-ion feature is always on.
Cleaning the Collection Grid Clean the grid every one or two weeks. As a reminder, the Cleaning Overdue indicator will turn amber after two weeks. If the Cleaning Overdue indicator turns red, the unit has shut down because of excessive dirt or circuitry problems. In many cases, a thorough cleaning will return the unit to normal operation. 1. Before cleaning, unplug the unit. 2. Remove the collection grid by releasing the latch and pulling the grid from the top of the unit. 3.
Thorough Cleaning If the unit makes noise during operation, a thorough cleaning of the grid, back grill and OzoneGuard front grill may be required. Note: The OzoneGuard cannot be detached from the front grill. The OzoneGuard has sharp edges; use caution when cleaning. 1. Before cleaning, unplug the unit. 2. Release the back grill and the OzoneGuard front grill by lifting the blue RELEASE-TABS on the bottom of the grills. Slide up to remove. 3.
Additional Information The exterior of the unit can be cleaned using a cloth or sponge and a solution of one part household bleach to five parts water or any bleach-based spray cleaner. Before plugging the unit back into an outlet, allow the surface to dry completely. The unit will not function while the collection grid is removed or either of the grills are removed. The majority of collected particles will gather on the removable stainless steel grid. Over time, debris will accumulate inside the unit.
Statement of FCC Compliance — Model SI867 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Statement of FCC Compliance — Model SI867 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for assistance.
One-Year Warranty What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for one year from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.
