Instruction Manual

Head H1 or H2
7
Batteries
The clock and the weather station each use 2 AAA (or UM-4) batteries
(purchase separately). Insert the batteries, observing proper +/– polari-
ties, as indicated by the diagram in the battery compartment.
Notes:
•
We recommend Alkaline batteries.
• In accordance to the environmental laws in your area, properly
dispose of the used batteries.
• If the unit is operating in an unfavorable way or is malfunc-
tioning, remove then reinsert the batteries in the back of the
clock. Then press the RESET button on the back of the clock.
Setting the Atomic Time and Date
When the receiver circuit is in operation, the antenna icon on the
LCD blinks. The bars facing the antenna indicate the strength of the
radio signal: no bars mean there is no signal or a very weak signal
being received; one bar indicates a weak signal; 5 bars indicates
the strongest signal. Use the radio signal strength indicators to find
a location where the reception is strong. Do not put the clock on a
metal wall. If the clock is too close to electrical appliances, such as
a TV, mobile phone or computer, they may cause undesirable signal