900MHz Outdoor Wireless Speakers SR277 Instructions Read and save these instructions.
Table of Contents Warnings...............................................................................................................4 Battery Precautions ...........................................................................................4 General Instructions ..............................................................................................4 Overview ..........................................................................................................4 Features .................
Warnings •To avoid electric shock, do not handle the transmitter base or AC adapters with wet hands. •Do not attempt to repair or modify this unit. •Do not use attachments not recommended by the manufacturer. •Do not drop, shock or apply pressure to the unit. This may cause permanent damage. Battery Precautions •Only use specified C alkaline batteries or equivalent replacements with this unit.
Features •Operating distance up to 150 feet. •RF transmission travels freely through walls, floors and other solid objects. •Auto on/off function. •Auto tuning function. •Remote control unit. Parts Identification Transmitter AC Adapter Antenna Signal Indicator Power On Indicator DC IN 12V INPUT BAND 3.
Parts Identification Speaker Receivers Battery Compartment Power Indicator DC In Jack Power On/Off Button Volume +/- Bass Boost Auto Tune Button Buttons Buttons Remote Auto Tune Button Volume +/Buttons Power On/Off Button 6
Transmitter Operation 1. To operate the transmitter base, slide the antenna tube over the antenna wire until it connects with the base. 2. Plug the included AC adapter into a standard wall outlet. 3. Insert the adapter connector plug firmly into the DC IN jack located on the rear panel of the transmitter base. 4. To connect virtually any audio source (CD system, radio/cassette player, TV, DVD, VCR, computer, etc.) to the transmitter base, insert the 3.
Speaker Operation 1. To switch on the speakers, press the ON/OFF button located on the front panel of each speaker. A blue power LED illuminates. Power may also be switched on from the remote control. Note: The ON/OFF button on the remote control does not function as the primary power switch for the speakers. To operate the ON/OFF function by remote control, speaker power must be switched ON first. (See Power Off.) 2.
Speaker Operation Note: •When transmitting over long distances, the audio signal becomes weaker and interference increases. •If the source signal is too weak for reception, the transmitter automatically switches off after approximately four minutes to protect the unit and save power. If the source signal returns to an adequate level, the transmitter automatically switches back on. Remote Control The remote control can be used to operate speaker Power, Auto Tune and Volume functions. 1.
Troubleshooting No Sound •Ensure the AC adapter is securely plugged into the wall outlet and the transmitter DC IN jack. •Ensure the speaker POWER button is in the ON position. •Speaker batteries may be too weak. Replace with new batteries or connect with the included AC/DC adapter. •Ensure the connected audio device is switched on and producing a signal. •Ensure that the volume level is set to a moderate level. Distortion •Ensure the speakers and transmitter are operating on the same frequency.
Statement of FCC/DHHS Compliance WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This product complies with DHHS Rule 21 subchapter J at date of manufacture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Warranty This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts. What The Sharper Image Will Do The Sharper Image will repair any defects in materials or workmanship.
