Owner Manual

MAINTENANCE GUIDELINES
PREVENTATIVE MAINTENANCE

Always protect oors when moving heavy objects to prevent permanent scratches and tears.

Do not use tape to secure oor protection during construction or renovation.Use ram board or similar to protect the oor.
Use appropriate wide oor protectors under tables, chairs, and any other heavy home furnishing to avoid permanent damage.
Walk-off mats should be used at all entrances to absorb soil and moisture. If mats are placed directly on top of the resilient oors, use mats without
latex or rubber backings to avoid possible discoloration.
Use appropriate window coverings to avoid direct sunlight as this can fade the color of the ooring.
ROUTINE MAINTENANCE
Daily removal of dirt and dust is important to prevent particles from abrading the surface of resilient oors. Sweeping, dust mopping, and vacuuming
are recommendations to remove soil particles that can result in scratches and worn appearances. Do not use vacuums with rotating beater bars on
hard surfaces.
Periodic wet cleaning will be necessary to help maintain the oor’s appearance. Always pre- vacuum or dust mop before any type of wet cleaning.
Appropriate vinyl oor cleaning equipment and cleaning agents (neutral pH oor cleaners) are recommended. Do not use abrasive cleaners or cleaning
agents that leave dull residues on the surface of the oors. Follow the cleaning manufacturer’s instructions for damp mopping and application. If rinsing
is necessary, use clean water and expedite drying with air movers or fans.
Shaw Hard Surface Cleaneror equivalent oor cleaner are recommended for general spotting and cleaning.
Avoid using mop and shine products on your resilient ooring.
SPOT & SPILL REMOVAL

Our ooring products are engineered to resist and minimize common staining.

Absorb wet spills as quickly as possible by blotting with paper or cloth towels. Rinse with water if necessary and blot dry.
Dried spots should be removed by gentle agitation and rinsed with water. Blot dry.
Use Shaw Hard Surface Cleanercleaning products or products formulated for vinyl oor cleaning. Do not use detergents or abrasive cleaners since
these products can leave a dull residue.
Use rubbing alcohol (isopropyl alcohol) with a clean white cloth for spots requiring a solvent type cleaner that water and cleaning agents cannot
remove.

Please note that some stain conditions may become permanent.

Safety Caution: The surfaces of resilient oors change during wet cleaning and nish applications. Use appropriate safety
measures.
2
shawoors.com
For reference purposes only if printed or downloaded. Revision: 12032019