Selling Sheet

ManualsBrandsShaw ManualsShop All Shaw FlooringShaw Elegance BN - 3" x 6" Glossy Ceramic Thin-Set Bullnose

shawfloors.com direct 03.07.2018

TILE & STONE

ELEGANCE

Style Number (Bullnose) CS35L CS85M

Construction ceramic ceramic

Tile Type bullnose bullnose

Tile Size 3" x 6" 4" x 16"

The basis of a beautiful kitchen! This collection starts with the classic 3" x 6" wall tile and adds an exciting new size and

shape - 4" x 16" - for an elegant, modern look. Mosaics and coordinating bullnose round out the series.

− Wall Tile

Porcelain with glossy finish

Perfect for kitchen backsplashes and shower walls

− Matte Mosaics

Porcelain: Suitable for floors

and walls

− Gloss Mosaics

Porcelain: Suitable for walls

− Bullnose

Porcelain with glossy finish

CS35L buLLnoSe muSt be uSed with 3" x 6" waLL tiLe

CS85m buLLnoSe muSt be uSed with 4" x 16" waLL tiLe

A DCOF value of > 0.42 is the new standard for tiles speciﬁed for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of

> 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of

North America’s website: www.tcnatile.com

MANUFACTURER’S WARNING:

- Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking

surface where water, ice, oil, great and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly

slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.

- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for

use on ramps.

- For additional information, refer to Factors to Consider.

- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final

selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI

A137.1 standards.

Beneﬁts

3" x 6"

Gloss Finish

CS34L

4" x 16"

Gloss Finish

CS36L

2" x 2" Mosaic

Gloss Finish

12" x 12" x 2"

CS37L

100 White

101 Biscuit

200 Linen

500 Warm Grey

550 Taupe