Specification Sheet

A low VOC, fast drying crack isolation membrane
for same day tile installations. It provides a thin
protection layer to inhibit subsrate crack transfers up
to 1/8". Fracture Guard FD conforms to any shape
or pattern allowing endless architectural designs.
• Fast drying formula
• Isolates cracks up to 1/8"
• Can be applied with a brush, roller or trowel
• Exceeds ANSI A118.12 for Crack Isolation
A geometrically configured
polyethylene uncoupling membrane
that separates the floor base from
the tile floor finish preventing crack
transfer.
• Contains an internal waterproof
layer that stops moisture from
transferring in both directions.
• The mat’s design locks in at every
point of contact with mortar
• Long term floor durability
The first liquid applied membrane to
provide crack isolation up to 1/8". It
offers maximum protection for your tile
and stone installation by inhibiting the
transfer of cracks from the substrate to
the ceramic, porcelain or stone tile. It is
ultra-flexible with an elongation over
1000%.
• Adheres to all common surfaces
• Isolates cracks up to 1/8”
• Can be applied with a brush,
roller or trowel
• Exceeds ANSI A118.12 for Crack
Isolation
FRACTURE GUARD FD
FRACTURE GUARD
UCM
FRACTURE
GUARD
6
CRACK ISOLATION
Item Code Product Size
1779 ME Fracture Guard FD 3.5 gal. Pail
Item Code Product Size
3139 ME Fracture Guard 3.5 gal. Pail
Item Code Product Size
3455-UCM
ME Fractrue Guard
Uncoupling Mat
323 sq. ft Roll
3454-UCM
ME Fractrue Guard
Uncoupling Mat
108 sq. ft Roll