Dimensions Guide

552020
EXCLUSIVELY AT LOWE’S®
LEARN MORE AT LOWES.COM
TRIM & MOLDING PROFILES
Matrix trims and moldings are designed to coordinate with your Matrix oor.
QUARTER ROUND
Used to accent the transition from the baseboards to floor surface.
INSTALLATION INSTRUCTIONS:
Measure and cut to fit. Affix Quarter Round using glue, molding tape or nails. When using
adhesive, be sure to follow manufacturer’s instructions completely.
REDUCER
Used to transition from a hard surface floor (Matrix) to a floor with a lower height
(ceramic tile, low pile carpet).
INSTALLATION INSTRUCTIONS:
Cut Reducer and track to same desired length. Secure track to floor with glue, molding tape or
nails and press or tap Reducer into track to desired depth using rubber mallet.
OVERLAP STAIR NOSE
Used to provide the finishing touch to the front stair edge when installing Matrix
on stairs.
INSTALLATION INSTRUCTIONS:
Measure and cut to fit. Affix Stairnose using adhesive, being sure to follow adhesive manufacturer’s
instructions completely.
T-MOLDING
Used in doorways to join two adjacent floors that are close to the same height.
INSTALLATION INSTRUCTIONS:
Cut T-Molding and track to same desired length. Secure track to floor with glue, molding tape or
nails and press or tap T-Molding into track to desired depth using rubber mallet.

Summary of content (2 pages)