Installation Guide

05152020
MORE MATRIX® QUESTIONS? Call 1-800-355-7429 and select option 2 twice (Se habla español)
THE PREP
THE PATTERN
THE STEPS
INSTALLATION 101
1. Store and install Matrix flooring in a climate controlled location
with a temperature range between 55°–85°F (13°–29°C).
If product is stored in temperatures outside this range, acclimate the
product for 48 hours prior to installation
2. Inspect Subfloor (See Step 1)
3. Inspect planks for damage before installing.
4. To minimize shade variation, mix and install planks from several
cartons.
THE TOOLS
Tape Measure Pencil Rubber Mallet Utility Knife ¼" Spacers Tapping Block Pull Bar T-Square
WARNING
Do not sand, dry sweep, dry scrape, drill, saw, beadblast or mechanically chip or pulverize existing resilient
flooring, backing, lining felt, asphaltic “cutback” adhesives or other adhesives. Avoid creating dust. Inhalation
of such dust is a cancer and respiratory tract hazard.
Random Appearance with a Minimum 8" Offset
Make sure your subfloor is: clean, flat, dry and
structurally sound. Wood Suboor | Concrete Suboor
1.
Choose your starting wall
2.
COVER