Use and Care Guide

Spot and Spill Removal:
Shaw’s flooring products are engineered to resist and minimize common staining.
• Absorb wet spills as quickly as possible by blotting with white paper or cloth
towels. Rinse with water if necessary and blot dry.
• Dried spots should be removed by gentle agitation and rinsed with water. Blot
dry.
• Use Shaw R2x Hard Surface cleaning products or products formulated for vinyl
floor cleaning. Do not use detergents or abrasive cleaners since these products
can leave a dull residue.
• Use rubbing alcohol (isopropyl alcohol) with a clean white cloth for spots
requiring a solvent type cleaner that water and cleaning agents cannot remove.
Please note that some stain conditions may become permanent.
Safety Caution: The surfaces of resilient floors change during wet cleaning and finish
applications. Use appropriate safety measures.
Technical Service Bulletin No. 523 – 3/18
For reference purposes only if printed or downloaded.