Dimensions Guide
08072019
EXCLUSIVELY AT LOWE’S®
MORE SMARTCORE® QUESTIONS? Call 1-800-355-7429 and select option 2 twice (Se habla español)
TRIM & MOLDING PROFILES
Matrix trims and moldings are designed to coordinate with your Matrix floor.
QUARTER ROUND
Used to accent the transition from the baseboards to floor surface.
INSTALLATION INSTRUCTIONS:
Measure and cut to fit. Ax Quarter Round using glue, molding tape or nails. When
using adhesive, be sure to follow manufacturer’s instructions completely.
REDUCER
Used to transition from a hard surface floor (Matrix) to a floor with a
lower height (ceramic tile, low pile carpet).
INSTALLATION INSTRUCTIONS:
Cut Reducer and track to same desired length. Secure track to floor with glue, molding
tape or nails and press or tap Reducer into track to desired depth using rubber mallet.
STAIRNOSE
Used to provide the finishing touch to the front stair edge when installing
Matrix on stairs.
INSTALLATION INSTRUCTIONS:
Measure and cut to fit. Ax Stairnose using adhesive, being sure to follow adhesive
manufacturer’s instructions completely.
T-MOLDING
Used in doorways to join two adjacent floors that are close to the same
height.
INSTALLATION INSTRUCTIONS:
Cut T-Molding and track to same desired length. Secure track to floor with glue, molding
tape or nails and press or tap T-Molding into track to desired depth using rubber mallet.