User's Manual

45652 Instructions 8/25/2010 10:11:20 AM

Page 7 of 7

Operation is subject to the following two conditions:

• This device may not cause interference

• This device must accept any interference, including interference that may cause undesired operation of the

device.

Important Note:

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the device.

FCC/IC RF Radiation Exposure Statement:

1.To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.

Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void

user’s authority to operate the device.

2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipmentshould be installed and operated with a minimum distance of 20 centimeters between the radiator and your

body.

Compliance with IC Rules and Regulations

IC: 6924A-ZW3102

Jasco Products Company

Model: 45652

ZW3102

This Class B digital device complies with Canadian ICES-003.

SPECIFICATIONS

Power 120VAC, 60Hz

Signal (Frequency) 908.42 MHz

Maximum load: 3.3A, 400W Incandescent

Z-Wave controlled outlet is fused @ 6.3A. This fuse is not user serviceable.

Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.

Energy Monitoring Values: Voltage (V), Current (A), Watts (W), Kilowatt hours (KWh) and Power Factor (PF)

Operating Temperature Range: 32-104° F (0-40° C)

For indoor use only.

Specifications subject to change without notice due to continuing product improvement

Z-Wave is a registered US trademark of Sigma Designs