MSDS

Appropriate engineering
controls
Provide sufficient ventilation for operations causing dust formation. Observe occupational
exposure limits and minimize the risk of exposure.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear approved safety goggles.
Skin protection
Hand protection
It is a good industrial hygiene practice to minimize skin contact. For prolonged or repeated skin
contact use suitable protective gloves.
Other
Normal work clothing (long sleeved shirts and long pants) is recommended.
Respiratory protection
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn. Use a NIOSH/MSHA approved air
purifying respirator as needed to control exposure. Consult with respirator manufacturer to
determine respirator selection, use, and limitations. Use positive pressure, air-supplied respirator
for uncontrolled releases or when air purifying respirator limitations may be exceeded. Follow
respirator protection program requirements (OSHA 1910.134 and ANSI Z88.2) for all respirator
use.
Thermal hazards
None.
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment separately from regular wash. Observe any medical surveillance requirements.
9. Physical and chemical properties
Appearance
Physical state
Semi-solid.
Form
Paste.
Color
Off-white.
Odor
Low to no odor.
Odor threshold
Not applicable.
pH
7.5 - 9.9
Melting point/freezing point
Not applicable.
Initial boiling point and boiling
range
212 °F (100 °C)
Flash point
Not applicable.
Evaporation rate
Not applicable.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not applicable.
Flammability limit - upper
(%)
Not applicable.
Explosive limit - lower (%)
Not applicable.
Explosive limit - upper (%)
Not applicable.
Vapor pressure
Not applicable.
Vapor density
Not applicable.
Relative density
1 - 1.3 (H2O=1)
Solubility(ies)
Solubility (water)
Soluble in water.
Partition coefficient
(n-octanol/water)
Not applicable.
Auto-ignition temperature
Not applicable.
Decomposition temperature
Not applicable.
Viscosity
Not applicable.
Other information
Bulk density
8.3 - 11 lb/gal
VOC (Weight %)
3.5 - 5.6 g/l (Calculated by EPA Method 24)
10. Stability and reactivity
Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability
Material is stable under normal conditions.
SHEETROCK® Brand Lightweight All Purpose Joint Compound with Dust Control SDS US
918466 Version #: 01 Revision date: - Issue date: 04-February-2014
3 / 6