Portable Power Station 583Wh Portable Lithium Battery Emergency Power Source SPS-500-01 © 2021 Shell Brands International AG. All rights reserved.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS �������������������������������������������������������������������������� 3 EXPLANATION OF SYMBOLS ������������������������������������������������������������������������������������������ 4 SIGNAL WORDS ������������������������������������������������������������������������������������������������������������������ 4 INTENDED USE ���������������������������������������������������������������������������������������������������������������������� 5 BEFORE
IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using this product, basic precautions should always be followed, including the following: a) Read all the instructions before using the product� b) To reduce the risk of injury, close supervision is necessary when the product is used near children� c) Do not put fingers or hands into the product� d) Use of an attachment not recommended or sold by the power pack manufacturer may result
• Do not disassemble the product, there are no user-serviceable parts inside. Incorrect reassembly may result in electrical shock, chemical burn, fire, or explosion causing personal injury or damage to other devices. Disassembly of the product will void the warranty. • Improper use of this product may result in electrical shock, chemical burn, fire, or explosion causing personal injury or damage to other devices. • The product may become warm during operation.
INTENDED USE • This product is intended for charging external devices� This product supports DC and AC outputs and provides USB-A & QC, USB-C PD and wireless charging functionality� • This product features an emergency light function to alert other motorists of non-moving objects on the road� • This product is intended for private use only� It is not intended for commercial use� • This product is not waterproof� Use indoor if it is raining or the ground is wet outside� • This product is not suitable for use
PARTS AND FEATURES 2 3 4 OUT Watts 1 Item 6 OVERLOAD HOT COLD 5 6 7 Part Name IN AC 188 USB-A TYPE-C Mins CAR PORT 12V WIRELESS 8 Item Hours LED 9 10 Part Name 1 Display 6 Over temperature warning 2 Power of input/output 7 Low temperature warning 3 Battery level 8 Output mode 4 Battery life time 9 LED indicator 5 Overload warning 10 Error indicator
27 1 26 11 25 12 13 24 14 15 16 17 18 19 20 21 22 23 Item Part Name Item Part Name 11 Power button 20 USB-C PD socket (input&output) 12 DC output on/off button 21 AC power socket x2 13 Car charger socket 22 AC output on/off button 14 Input indicator 23 USB output on/off button 15 Anderson sockets (Solar panel) 24 Fan 16 DC socket (input only) 25 LED light on/off button 17 DC socket x2 (output only) 26 Wireless charging panel 18 USB-A QC socket 27 Handle 19 USB-A
28 30 29 Item 8 Part Name 28 LED light module 29 12V car charger 30 Power adaptor
INSTALLATION INSTRUCTIONS Charging the product NOTICE • Fully charge the product before first use� • During charging, the input indicator 14 lights up and the bars of the battery level 3 are flashing� • When the input indicator 14 goes off and the battery level 3 shows 100 %, the product is fully charged� Disconnect the charger from the product� • There are 4 ways of charging the product: Charging method How to charge Full charge duration Power adaptor 30 • Connect the power adaptor 30 to the DC socket
OPERATING INSTRUCTIONS Before operating the product, refer to the Important safety instructions chapter on P. 3 in order to avoid the risk of fire, electric shock or injury to persons. Switching on/off NOTICE • After 2 minutes of inactivity without any power input/output, the display 1 goes off. • After 5 minutes of inactivity without any power input/output, the product switches off. • To switch on, press and hold the power button 11 for 3 seconds. The power button 11 and the display 1 light up.
Charging external devices CAUTION • Before connecting, ensure the connected device(s) do not exceed the product’s output (see the Specifications chapter, P� 14)� • Switch off external devices before connecting them to the product� When the product is on, press the corresponding button to charge: How to charge • Connect the external device to the car charger socket 13 � • Connect the external device to the DC socket 17 � Start/stop charging On indicator Press the DC output on/ off button 12 � DC output
Operating the LED light module (not only for emergency use) NOTICE • The LED light module 28 can be used to support the emergency triangle of your vehicle to alert other motorists of non-moving object on the road. • Place the emergency triangle of your vehicle 100 feet (30 m) behind the vehicle, and this product, with the emergency light on, 10 feet (3 m) behind the vehicle. To toggle between the LED light modes, press the LED light on/off button 25 repeatedly.
USER MAINTENANCE INSTRUCTIONS CAUTION • Install the plug covers before cleaning and/or storing the product. • Always carry the product by the handle 27 . • Disconnect all external devices and switch off the product before cleaning. • During cleaning, do not immerse the product in water or other liquids. Never hold the product under running water. • To clean the product, wipe with a soft, slightly moist cloth.
SPECIFICATIONS General Model: SPS-500-01 Emergency light: 3 W LED + Warning triangle Storage conditions: 14 to 104 °F (–10 to 40 °C) Net weight*: 15�0 lb (6�7 kg) Dimensions*: 11�81 x 7�08 x 8�66" (30 x 18 x 22 cm) *The weight and dimensions may vary due to measurement errors� Please refer to the actual measurements� Power Output AC output: 500 W Continuous, support up to 1500W 120 V 60 Hz, Pure Sine Wave DC output x2 : 12 V , 5 A(each) Car socket output: 12 V , 10 A 2 x USB-A 5 V, 2�4 A
TROUBLESHOOTING Error code Problem Solution Over load Remove extra devices from DC or AC outputs PV (Solar panel) charging input over-powered Replace another solar panel with less output power. 01 02 Temperature too high (> 85 °C /185 °F) 03 Keep the product at suitable ambient temperature. or Temperature too low (< —10 °C / 14 °F) 03 Output low voltage Recharge the station before use Short circuit Remove the appliance and check if there are any short circuits.
Error code Problem Solution The product does not switch on Charge the battery. (see Charging the product chapter, P. 9) The product does not charge or operate Fan 24 blockage 16 Ensure to press the corresponding charging type button. (see Charging external devices chapter, P. 11) Ensure the device and charging cables are functioning. Change to another cable if problem persists. Switch off the product. Vacuum the fan’s 24 vents.
WARRANTY CONDITIONS a) We will, at our discretion, repair any product that proves to be defective in material or workmanship during the warranty period of 12 months.
FCC STATEMENT FCC SUPPLIER’S DECLARATION OF CONFORMITY Unique Identifier SPS-500-01 Responsible Party Shell Trading U�S� Contact Information 1000 Main Street, Suite 1700 Houston, TX 77002, USA Email support@skyintelligent�com FCC COMPLIANCE STATEMENT 1� This device complies with Part 15 of the FCC Rules� Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
ISED COMPLIANCE STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Portable Power Station 583Wh Portable Lithium Battery Emergency Power Source SPS-500-01 Power Station is part of the Shell Energy range of products. Shell and the Shell Pecten logo are trade marks of Shell. Used under license.
