Owner manual

PRECAUTIONS

This unit has been designed with a dampered vent from the chamber. In order to work

effectively and safely, some precautions will need to be taken by the operator.

5.1 The bottom surface of the chamber should not be used as a work area.

5.2 In most applications, the exhaust damper will need to be open during drying or

degassing for best results.

5.3 THIS OVEN IS NOT AN EXPLOSION PROOF OVEN AND IS NOT DESIGNED TO

HANDLE COMBUSTIBLE GASSES. Do not place explosive, combustible or

flammable materials into the chamber.

5.4 Some of the out-gassed byproducts may be hazardous or unpleasant to operating

personnel. If this is the case, the exhausts should be positively ventilated to the

outside and dealt with according to local regulations. Your dealer can provide you

with a power exhaust that greatly helps under these applications.

5.5 Do not place sealed or filled containers in the oven chamber.

5.6 This oven is NOT designed for use in Class I, II, or III locations as defined by the

National Electrical Code.

5.7 This oven is not intended, nor can it be used, as a patient connected device.

Section