Smart WiFi Plug USER GUIDE WARRANTY & WARRANTY TERMS Allterco Robotics EOOD Sofia, Bulgaria © March, 2017
USER GUIDE WiFi Smart Plug Shelly® The Shelly® WiFi Smart Plug by Allterco Robotics is intended to be plugged into a standard Plug Type F (IEC) in order to control and monitor the electric power through it. Shelly may work as a standalone device or as an accessory to She® or another home automation controller.
Technical Information • Control through WiFi from a mobile phone, PC, automation system or any other device supporting HTTP and/or UDP protocol. • Microprocessor management. • Controlled elements: 1 electrical plug. • Controlling elements: 1 relay. • Shelly may be controlled by the integrated button. CAUTION! Danger of electrocution. Plugging the device to the power grid has to be performed with caution. CAUTION! Do not allow children to play with the device, esp. with the Power Button.
Installation Instructions CAUTION! Danger of electrocution. Even when the device is turned off, it is possible to have voltage across its clamps. Never disconnect or reconnect the clamps before ensuring all local power is disconnected. CAUTION! Do not connect the Device to appliances exceeding the given max load! CAUTION! Connect the Device only in the way shown in this instructions. Any other method could cause damage and/or injury.
MOBILE APPLICATION FOR SHELLY® Allterco Robotics EOOD Sofia, Bulgaria © March, 2017 5
The Shelly Cloud mobile application fig. 2 Shelly Cloud gives you opportunity to control and adjust all Shelly® devices from anywhere in the world. You only need an Internet connection and our mobile application, installed on your smartphone or tablet. To install the application please visit Google Play (Android - fig. 1) or App Store (iOS - fig. 2) and install the Shelly Cloud app.
WARNING: If the WiFi LED does not turn blue, press and hold the Power Button for at least 5 seconds. Watch at the color of the button. After the button begins to blink red, release it. The WiFi LED should then turn blue. If not, please repeat or contact our customer support at: support@shelly. cloud After registering, create your first room (or rooms), where you are going to add and use your Shelly devices. Step 2 Choose “Add Device”.
Press the Home button of your iPhone/ iPad/iPod. Open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. shellyplug-35FA58. If using Android: your phone/tablet will automatically scan and include all new Shelly devices found in the WiFi network that you are connected to. Step 4: Approximately 30 seconds after discovery of any new devices оn the local WiFi network, а list will be displayed by default in the “Discovered Devices” room.
Step 7: To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “yes” on the following pop-up. Step 6: Enter a name for the Device (in the Device Name field). Choose a Room, in which the device has to be positioned. You can choose an icon or add a picture to make it easier to recognize. Press “Save Device”.
Shelly Devices Settings After your Shelly device is included in the app, you can control it, change its settings and automate the way it works. settings. For example, with Restrict Login you may enter a username and password to restrict access to the embedded web interface in the Shelly device. You may automate the device operations from this menu as well. To switch the device on and off, use the respective ON/OFF button. To enter at the details menu of the respective device, simply click on it’s name.
Auto ON/OFF To manage the power supply automatically, you may use: When ON – Auto OFF after: After turning on, the power supply will automatically shutdown after a predefined time (in seconds). A value of 0 will cancel the automatic shutdown. When OFF – Auto On after: After turning off, the power supply will be automatically turned on after a predefined time (in seconds). A value of 0 will cancel the automatic power-on. Sunrise/Sunset Hours This function requires an Internet connection.
Smart WiFi RGB+W light is compatible with 12
The Embedded Web Interface Even without the mobile app the Shelly device can be set and controlled through a browser and WiFi connection of a mobile phone, tablet or PC. ABBREVIATIONS USED: Shelly-ID – the unique name of the device. It consists of 6 or more characters. It may include numbers and letters, for example 35FA58. SSID – the name of the WiFi network, created by the device, for example shellyplug-35FA58.
Settings – General Settings In this menu, you can configure the Shelly device’s work and connection modes. WiFi Settings – the WiFi connection settings. Access Point (AP) Mode: Allows the device to operate as a WiFi access point. The User can change the name (SSID) and the password to access the WiFi. After you have entered the desired settings, press Connect. WiFi Client Mode (CM): Allows the device to connect to an available WiFi network.
Firmware Upgrade: Shows present firmware version. If a newer version is available, officially announced and published by the Manufacturer, you can update your Shelly device. Click Upload File to install it to your Shelly device. Device Reboot: Reboots the device. Managing the Shelly Device Relay 1 Screen In this screen you can control, monitor and change the settings for turning the power socket on and off.
Auto ON/OFF Automatic powering/shutdown of the socket and the connected appliance: When ON – Auto OFF after: After turning on, the power supply will be automatically shut down after a predefined time (in seconds). A value of 0 will cancel the automatic shutdown. When OFF – Auto ON after: After turning off, the power supply will be automatically turned on after a predefined time (in seconds). A value of 0 will cancel the automatic start. Sunrise/Sunset hours This function requires an Internet connection.
Warranty Terms 1. The Device’s warranty term is 24 (twenty four) months, beginning with the date of purchase by the End User. The Manufacturer is not responsible for extra warranty terms by any other than the Manufacturer. 2. The Warranty is valid for the territory of EU. The warranty is applicable in compliance with all relevant laws and users’ rights protections. The purchaser of the Device is entitled to exercise his/her rights in accordance with all applicable laws and regulations. 3.
receipt, or attempted forgery of these documents, including (but not limited to) the warranty card or the documents proving the purchase. When there has been a self-repair attempt, (de)installation, modification, or adaptation of the Device by unauthorized persons. Intentional or negligent improper handling, storing or transportation of the device, or in the event of non-observance of the instructions included in this warranty. When a non-standard power supply, network, or faulty devices have been used.
12. The Manufacturer is not responsible for any property damage caused by a defect in the Device. The Manufacturer is not liable for indirect damages (including but not limited to loss of profits, savings, lost profits, claims by third parties) in connection with any defect of the Device, nor for any property damage or personal injury arising out of or related to the use of the Device. 13.
Warranty Card Shelly® Smart WiFi Plug (model S171) ........................................................... ........................................................... Serial number: ........................................................... ........................................................... Date of purchase: ........................................................... ...........................................................
