Wiring guide Max Voltage Max load Working temp Protection With 260V AC 11A -20 up to 40Co IP47
Step 1 L N N L Connect the wires, as shown on the picture above.
Step 2 Place the button extension lead, as shown on the picture above.
Step 3 Power OUT Power IN L N N L Connect the power (input and output) cables, as shown on the picture above.
Step 4 Power IN Power OUT Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5 Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.
Wiring guide Max Voltage Max load Working temp Protection With 260V AC 11A -20 up to 40Co IP47
Step 1 L N N L Connect the wires, as shown on the picture above.
Step 2 Place the button extension lead, as shown on the picture above.
Step 3 Power IN Power OUT L N N L Connect the power (input and output) cables, as shown on the picture above.
Step 4 Power IN Power OUT Inside the case of Shelly Button there are guiding arrows, which show how to organise the power cables. After placing the cables, they should look as shown on the picture above.
Step 5 Put the screws in the holes, shown on the picture above and tighten the top and botton parts of Shelly Button.