3G & WiFi Smart Camera USER GUIDE WARRANTY & WARRANTY TERMS Allterco Robotics EOOD Sofia, Bulgaria © 2018
USER GUIDE Shelly® Eye Smart Camera LEGEND: Front Rear 7. SD (Memory) Card Slot 8. SIM Slot 9. Speaker 10. Power Port - Micro USB 1. Power/Reset Button 2. LED 3. Camera Lens 4. IR 5. Microphone 6. Motion sensor fig.1 fig.2 The smart camera with 3G & WiFi, Shelly Eye by Allterco Robotics streams live video, saves videos on Cloud or SD.
Specification Camera Sensor: 1MP CMOS Resolution: • HD – 1280x720 p • WVGA – 640x352 p Camera Lens: • Aperture - F2.2 • Angle - 110° wide Video: • Compression format – H.264 • FPS – max 30 Audio Format: G.711 (16 bit/8 KHz) 3G: WCDMA (band 1, 2, 5, 8) WiFi: • Protocol: 802.11 b/g/n • Frequency: 2.
Technical information CAUTION! Keep the remote control devices (mobile phones, tablets, PCs) away from children. CAUTION! Use the Device only with power grid which complies with all applicable regulations. In case Shelly Eye is connected to the power grid and a short circuit occurs, it may damage the Device.
The Shelly Eye Mobile Application Shelly Eye app gives you the opportunity to control and adjust all Shelly® Eye Cameras from anywhere in the world. All you need is an Internet connection and our mobile application, installed on your smartphone or tablet. Initial Set-Up The first time you open the Shelly Eye mobile app, you have to create an account to manage your Shelly Eye® cameras. Registration 1. Download and install the Shelly Eye mobile application.
Device Inclusion To add a new Shelly camera, connect it to the power grid. Step 1 Choose “Add Device” - fig. 4. In order to add more Devices later, use the app menu at the top right corner of the main screen and click “Add Device”. Step 2 You will see the following screen - fig. 5 Scan the QR code placed on Shelly Eye. Upon successful scan of the code, the UUID of the Device will be shown below the QR code frame. Press the tick sign at the top right of the screen. fig. 4 fig.
Step 3: Select the Setup Mode (fig. 6): • Mode 1 – If you have not inserted a SIM card, and you hear a voice prompt when the Device boots up, press on Voice Prompt • Mode 2 – If you have inserted a SIM card, press on No Voice Prompt WARNING: In case the Device has not prompted with “Waiting for connection”, or you want to add the Device to another Wi-Fi network, reset it. To reset the Device press the button 10 consecutive times, then the LED will turn purple. After that the Device will restart.
MODE 1 Wi-Fi Step 1: When you hear the voice prompt you have to enter the Name (SSID) and password of your WiFi network (fig. 7). Step 2: You will see a tip on how to proceed (fig.8) Step 3: You will hear a voice prompt to scan the QR code on your phone with Shelly Eye. Place the screen of your phone in front of Shelly Eye and wait for the camera to scan the QR code (fig. 9). fig. 8 fig.
Step 4: Press Next when you hear the voice prompt that Shelly has scanned and connected successfully. Step 5: Your Shelly Eye will connect to your WiFi and will be added to your account (fig. 10). Step 6: You will hear the voice prompt that Shelly has connected successfully. Press on “Start Using” (fig. 11). fig. 10 fig.
MODE 2 3G Step 1: Press on “No voice prompt” (fig. 6) Step 2: Your Shelly Eye will connect through mobile data and will be added to your account (fig. 10). Step 3: You will hear the voice prompt that Shelly has connected successfully. Press on “Start Using” (fig. 11). fig. 10 fig.
Warranty Terms 1. The Device’s warranty term is 24 (twenty four) months, beginning since the date of purchase by the End User. The Manufacturer is not responsible for extra warranty terms by the Еnd Seller. 2. The Warranty is valid for the territory of EU. The warranty is applicable in compliance with all relevant laws and users’ rights protections. The purchaser of the Device is entitled to exercise his/her rights in accordance with all applicable laws and regulations. 3.
• Intentional or negligent improper handling, storing or transportation of the Device, or in the event of non-observance of the instructions included in this warranty.; • When a non-standard power supply, network, or faulty Devices have been used; • When there is a non-compliance between warranty card and/or without a purchase receipt, or attempted forgery of these documents, including (but not limited to) the warranty card or the documents proving the purchase.
12. The Manufacturer is not responsible for any property damage caused by a defect in the Device. The Manufacturer is not liable for indirect damages (including but not limited to loss of profits, savings, lost profits, claims by third parties) in connection with any defect of the Device, nor for any property damage or personal injury arising out of or related to the use of the Device. 13.
