Instructions

SHELLY MOBILE
APPLICATION FOR
TRV
Introduction
Download the Shelly Cloud Application by scan-
ning the QR code above, or access the devices
through the Embedded web interface, explained
further down in the user guide. Shelly devices are
compatible with Amazon Echo and Google Home
supported functionalities, as well as other home
automation platforms and voice assistants. See
details at
https://shelly.cloud/support/compatibility/
Registration
The rst time you load the Shelly Cloud mobile
app, you have to create an account which can
manage all your Shelly devices. You need to use
an actual e-mail because that e-mail will be used
in case of а forgotten password!
Forgotten Password
In case you forget or lose your password, click
the “Forgot Password?” link on the login screen
and enter the e-mail used in your registration.
You will receive an e-mail with а link to а page
where you can reset your password. The link is
unique and can be used only once.
First steps
After registering, create your rst room (or
rooms), where you are going to add and use your
Shelly devices. Shelly Cloud allows you to create
scenes for automatic control of devices at pre
-
dened hours or based on other parameters like
temperature, humidity, light, etc. (with available
sensors in Shelly Cloud). Shelly Cloud allows
easy control and monitoring using a mobile
phone, tablet, or PC. Shelly TRV can be grouped
with other devices in the application. It can also
be set to trigger actions on other Shelly devices,
run schedules, scenes, and webhooks.
THE SHELLY APP
Abbreviations:
AP - Access Point. The mode in which the Device
creates its own Wi-Fi network.
Device Inclusion:
Step 1
When the mounting of Shelly TRV to the radiator
is done, click the Shelly TRV Reset button.
“CL” message will appear on the Shelly TRV
display indicating that the Device is calibrating.
Once the calibration process is successful, “AP”
will be shown on the display of the device. The
inclusion process can now begin.
Step 2
Make sure the Location and Local Network for
the Shelly Cloud app are enabled in your phone
settings.
Please keep in mind that the inclusion process is
different for iOS and Android devices.
1. iOS inclusion - Select “Add device” from the
hamburger menu on the top right of your Shelly
Cloud App. Enter your home network name and
password, and click the “NEXT” button. Select
“Shelly TRV” from the dropdown list. A mes
-
sage will pop up asking for your permission to
connect to the AP of your Shelly TRV (e.g Shelly-
TRV-f008d1d8bd68). click the “Join” button.
g. 1
g. 2
2. Android inclusion - Select “Add device” from
the hamburger menu on the top right of your
Shelly Cloud App. Select your home network
from the dropdown list and enter its password.
Next, you will see listed all of the available de-
vices. Choose your Shelly TRV device from the
list and click “Yes” when asked for inclusion. A
message will pop up asking for your permission
to connect to your Shelly TRV’s AP address (e.g.
ShellyTRV-f008d1d8bd68). click the “Yes” but-
ton?.
g. 3
g. 4
Step 3
Once this proccess is completed, approximately
10 seconds later, a pop up (button) will appear on
the top of the page with “Discovered devices” on
the home screen of the Shelly Cloud App. click
the “Discovered devices” button and nd your
Shelly device in the list. If you do not see it, try
again by clicking the “SCAN” button.
Step 4
You can choose which available device from the
list to include. If a newer rmware update is avail-
able, the app will rst let you update and then
add the device. Click the “ADD DEVICE” button to
move to the next step of the inclusion process.
Step 5
Enter a name for the device in the “device name”
eld. Select a room which the device will be add-
ed to. For easy recognition of the device select
an image from the list of existing ones or upload
your own. Click the “DONE” button.
Step 6
If you’d like to connect your device to the cloud