Use and Care Manual

Overcurrent protection
Overpower protection
Supported load types
Dimmable LED lamps: up to 200 W per channel
Incandescent bulbs: up to 200 W per channel
Halogen lamps: up to 200 W per channel
Iron-core transformer with low-voltage incandescent lamps: up to 200 VA per channel
Dimmable electronic transformers: up to 200 W per channel
User interface
Inputs
One (Reset) button
Press and hold for 5 seconds to enable Device access point and Bluetooth
connection.
Press and hold for 10 seconds to factory reset the Device.
Outputs
LED indication
Power (red): Red light indicator will be on if power supply is connected.
Wi-Fi (varies):
Blue light indicator will be on if in AP mode.
Red light indicator will be on if in STA mode and not connected to a Wi-Fi
network.
Yellow light indicator will be on if in STA mode and connected to a Wi-Fi
network. Not connected to Shelly Cloud or Shelly Cloud disabled.
26/08/2024, 16:46
Shelly Pro Dimmer 2PM
https://kb.shelly.cloud/knowledge-base/shelly-pro-dimmer-2pm
6/12