Instructions / Assembly

ManualsBrandsShelterLogic ManualsStorage & Organization30 in. EasyHook Anchor Kit 4-Piece

Easy-Hook Earth Anchors (4 Pcs.)

10036

IMPORTANT: PLEASE READ CAREFULLY: ShelterLogic has no control over the elements such as wind, heavy snow or heavy

rain, we cannot be responsible for damage caused by the shelter or to the shelter. We suggest you contact your insurance carrier for information just as you

would for any other outside structure.

Please Read Instructions Completely Before Installation

CUSTOMER SERVICE:

1-800-524-9970

150 Callender Road

Watertown, CT 06795

ShelterLogic

All Weather Shelters

Installing Earth Grabber Anchors

Using the provided steel driving rod and a

sledge hammer (an electric rotary hammer

may also be used) drive each anchor into

the ground leaving approximately 8 inches

of cable exposed above the surface. The

anchors should be located at the four cor-

ners and the remaining should be spaced

evenly on both sides. Remove the driving

rod; insert it through the loop in the cable

and pull up on the cable to set the anchor.

After the anchors are firmly set, wrap the

cable around the cover rail and clamp with

the provided clamps. Be sure to take all

the slack from the cable.