Specification

05-22544-22545-22546-22547
-22548-22549-22589-0A
Page 3
Step 1:
Remove assembly
from portable, wheeled
storage bag. Grab corner
legs in each hand. Lift
frame slightly off ground.
Stepping backwards, pull
frame apart until your
arms are fully extended.
Step 2:
Unfold cover. Place
cover over frame.
Align corner pockets
of cover over frame
legs.
Step 3:
Do not place hands
between frame tubes.
Push up until canopy is
fully opened.
Step 5:
Pull corners down snug,
attaching hook and loop
fasteners. Secure cover
fasteners around top
roof frame.
Step 4:
Slide corner brackets
up until button snaps
into place. Align roof
supports at joint and
insert stabilizer pins.
Step 6:
Step 7:
For temporary anchoring of canopy on grass, dirt or packed
soil, insert temporary spike anchors through corner feet.
CAUTION: Temporary spike anchors are NOT designed
for permanent installation. Never leave canopy unattended.
For all PRO SERIES
™
straight leg Pop-Ups, legs should be
square and straight when temporary spike anchors are
inserted through corner feet.
For assembly questions, Please call Customer Support:
1-800-524-9970 or in CANADA: 1-800-559-6175
SHOWN
WITHOUT
COVER
FOR
CLARITY
CORNER OF
SHELTER
COVER
FASTENER
PIN
ANCHOR
Slide legs to desired
height, making sure
buttons snap into place.