Product Manual

ManualsBrandsShelterLogic ManualsKitchenMax AP 10 ft. x 20 ft. 2-in-1 White Canopy with Enclosure Kit

05-23529-0CPage 1

10' x 20'

2-IN-1 MAX AP CANOPY & ENCLOSURE KIT

Assembly Instructions

DESCRIPTION MODEL #

10' x 20' 2-in-1 MAX AP Canopy & Enclosure Kit - 8 Leg - White

23529

Before you start: 2+ individual recommended for assembly, approximate time 3 hr.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

150 Callender Road

Watertown, CT 06795

www.shelterlogic.com

1-800-524-9970

1-800-559-6175

Canada:

RECOMMENDED TOOLS

4/8/09

Summary of content (6 pages)

PAGE 1
0' x 20' 2-IN-1 MAX AP CANOPY & ENCLOSURE KIT Assembly Instructions Description 10' x 20' 2-in-1 MAX AP Canopy & Enclosure Kit - 8 Leg - White Model # 23529 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2+ individual recommended for assembly, approximate time 3 hr. 1-800-524-9970 150 Callender Road Watertown, CT 06795 www.shelterlogic.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird excrement and light snow. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
10' x 20' 2-in-1 MAX AP Canopy & Enclosure Kit - 8 Leg - Parts List - Model #23529 Quantity Part # Rafter Poles, Swedge 24 3/8" 8 13104 Poles, Swedge 40 11/16" 25 13103 Cross Poles 39 1/2" 9 13107 Leg Poles 39" 8 13105 3 - Way Frame Connectors 6 13101 4 - Way Frame Connectors 6 13102 Bungee Cords 102 10066 Canopy Cover 1 10072 Base Feet 8 10075 Side Walls 2 10082 Back Panel 1 10085 Double Zipper Door 1 10086 Anchors 8 10431 Description of Parts: 1.
PAGE 4
2. ASSEMBLE ROOF FRAME NOTE: Swedged tubes insert into plain ends at the crimp marks. Swedged Tubes Connections 13103 13104 Crimp Marks 3. Assemble Legs & Attach to Roof Frame A. Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side.
PAGE 5
4. Anchor the Frame Anchoring Base Feet There are four holes on each base foot that the anchor can go into. A. Select a hole in each base foot. Insert each anchor into the ground until the round head is touching the base foot. B. Insert one anchor into all eight base feet. 10431 This is a temporary spike anchor. Not intended for permanent use. 5. Place Cover and secure to CANOPY Frame A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails. B.
PAGE 6
. Attach Enclosure wall and door panels Canopy enclosure panels attach to frame with bungee cords. A. Attach all the enclosure panels with bungees at the top first. Adjust the panels as needed to ensure a tight and even fit before securing to legs with bungees. B. When securing enclosure panels to legs, note that each bungee is shared with the neighboring panel. NOTE: Door panels zippers must be closed when securing door panel. CAUTION: Bungee Cords are under extreme tension.